Making Road Trips Easier with the Tepui Rooftop Tent
Intro to Tepui Tents
This cool company out of Santa Cruz makes an awesome rooftop car tent that first caught my eye at the Subaru dealership when I was getting my new ride. I’m sure you’ve seen them driving around. They look like big plastic boxes containing clothes, but underneath is a roomy, comfortable tent you can take anywhere.
There are a number of different models in the lineage of Tepui Tents and they all have the same basic design. The two-person Ayer tent starts at $835 and the four-person Autana will run you $2,750.
The basic tents are made of a 600-denier ripstop polyester & cotton blend coated with water repellent. The sides have zippered windows and a door to reveal a heavy-duty mesh to keep the bugs out. The windows and door can be rolled up and stowed to be kept out of the way. Awnings on each side help keep the sun and rain out of the tent. Probably the most surprising aspect is the comfortable mattress; the 2.5-inch thick high-density foam is surprisingly cozy. The strong frame and durable material truly makes these four-season tents.
The two-person Ayer weighs 115 pounds and has a footprint of 48″ x 42″ when closed, and is 11″ high. Opened, the dimensions are 48″ x 84″ and has 39″ of headroom. A heavy-duty PVC cover will keep your tent protected from the elements and features a super-easy large zipper to secure it.
Installing the Tepui rooftop tent
The Tepui was installed on my car and ready to go within one hour of tearing the shipping box open. All of the tools necessary for installation are included in some sturdy bags that’ll last the life of your tent.
The first step is to mount the brackets that will secure the tent to the roof rack. This task takes two people; one person needs to crawl inside and hold the bolts in place while the bracket and nuts are secured on the other side. I suppose you could tape the bolts to the inside of the tent as you get the nuts on, but you’ll want that second person later to help lift the thing!
Note: The instructions say that if you want the tent to open to the side of the car, the brackets should be perpendicular to the hinge. This is true if your roof rack runs the length of the car. If you’re mounting the tent to crossbeams off the rack, like on the Subaru Outback, the brackets need to be parallel to the hinge.
As mentioned earlier, it takes two people to lift the Tepui. I’ll confess I did it by myself one time but I ended up with some scratches on the roof of my car…I’ll come up with a system some day.
The most time-consuming part of installation is tightening the mounting brackets to the roof rack. The bolts are long, and on my Subaru Outback there’s not a lot of clearance between the end of the bolt and the roof. Once you can get the nut on there, it just takes a lot of ratcheting to get them tight. Solution: replace the provided bolts with shorter ones from the hardware store.
Using the Tepui Rooftop Tent
Driving with the Tepui
Man I was so paranoid. I’ve never carried anything this heavy on the roof before and even though the dynamic load of the rack was rated high enough for this tent, I still had my reservations. I kept looking through the moonroof but the Tepui was solid with each turn and at highway speeds.
I did notice a small decrease in gas mileage but that’s to be expected with that much drag added to the top of the car. It wasn’t much though; I can usually go about 550 miles cross-country on one tank of gas and with this I get about 480. Though another time I had a tailwind the entire drive and had over 550. So it all depends on other conditions. Anyways, if you do have a moonroof you’ll notice the noise with the roof open. Otherwise it doesn’t add any noticeable noise to the drive.
Making & breaking camp
The best part of the Tepui is the ease of making camp.
- Find a sweet spot to make camp for the night
- Unzip & roll off the cover
- Grab the ladder and fold the tent open
- Install the small rods that hold the awnings up
Breaking camp is just as easy, doing all of these steps in the reverse order.
I’ll have a video soon to show just how quick & easy the entire process is.
One thing to note, that I hope doesn’t really need to be said: make sure you’re parked on level ground!
My only complaints about the Tepui rooftop tent
The thing I least looked forward to was tightening the mounting brackets to the roof rack. As I said earlier, the bolts are long and there’s not a lot of clearance between the tent and the roof. Both of my forearms were rubbed raw, bleeding at times, from ratcheting in that small space. Replacing the long bolts with shorter ones nixed this problem and my contempt for installation & taking it down.
This next one I can’t really solve. When I get to a campsite I’ll be at for a few days, I’d normally leave my backpacking tent set up and then come & go in the car when I wish with no hassles. The Tepui must be cleaned out, closed, and zipped up every time you want to take the car somewhere. You can’t really unhitch it and leave it in camp. Then you get back late and you have to open it back up again and throw your stuff back in. Does this suck? No, not really, since it does open & close so quickly, but it’s just a bit of an inconvenience if you plan on running around in the car from camp.
One other thing to note. Condensation forms between the bottom of the mattress and the floor of the tent structure. I haven’t tried putting any kind of vapor barrier in there yet, like a plastic sheet or perforated flooring tiles, so if anyone has ideas about that please let me know! I saw Tepui does sell a mat on their website. Anyways, just be sure to dry it out before storing it for a long time.
Where to buy a Tepui rooftop tent
A number of dealers throughout the country sell these tents; you can check Tepui’s map of dealers to find one near you.
You can also purchase the tents online. Browse through the available selections at these two websites:
Do any other Tepui owners have anything to add? Any questions? Please leave them below!